disperatoooooooo

ourika

ourika

Digital-Forum Senior
Registrato
25 Giugno 2003
Messaggi
339
ragazzi,per favore ditimi cosa questa roba:mad:devo buttare il mio sammy o ce qlq speranza...
grazie...
Erased 56 sector[0x7ff50000]
Erased 57 sector[0x7ff60000]
Writing end

========================================
Samsung Brand 5512 Model
Dual CI
VIACCESS
HW version 5.04
Loader version 5.01
========================================
Select Download
Timeout
Reboot
STLLI_Init(LLI)=Ok
STLLI_Open(LLI)=Ok
STAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
STEVT_Init()=Ok
STPWM_Init()=Ok
STCLKRV_Init(CLKRV0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Read STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003)

Demodulator Reset FAILED!
PTI_Init()=Ok
STCLKRV_Open(CLKRV0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
declared symbols = 0 (0 commands + 0 mac
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
allocated symbols = 0 / 0
free memory size = 800000 bytes
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
STAUD_Init(AUD0)=QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknow
ledge (0x00080003)
Ok
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
QPSK STI2C_Write Ok
>>>>>>>>>>>>>>>>>>START TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<<
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge
)
>>>>>>>>>>>>>>>>>>END TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<
QPSK STI2C_Write Ok
STTTX_Init(TTX)=Ok
QPSK STI2C_Write Ok
STAUD_Open(AUD0)=Ok
QPSK STI2C_Write Ok
STVTG_Open(VTG0)=Ok
QPSK STI2C_Write Ok
STVID_Open(VID0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
5512STDENC_Init : Done
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
STDENC_Open, Device 'DENC0' Opened
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080
)
5512STDENC_SetEncodingMode : Done
QPSK STI2C_Write Ok
STVTG_SetMode()=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
Mode 576,50,27000
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
Samsung Brand 5512 Model

)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 HW version 5.04
Loader v
)s
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003=====
OSD initializing......
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003.
CCCCCCCC
Checksum: OK(DD44)
3-02
9-02
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x000800030000]
Erased 37 sector[0x7fe20000]
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003[0x7fe40000]
Erased 40 sector[0x7fe50000]
)
Erased 52 sector[0x7ff100
)]
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
Erased 54 sector[0x7ff30000]
Erased 55 sector[0
)f
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Ok0]
Erased 57 sector[0x7ff60000]
QPSK STI2C_Write STI2C_E


OSD: Region creation . . . passed
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK -080003)
Reboot
STLLI_Init(LLI)=Ok
OSD Region: W=720, H=576, X=0, Y=0
STAVMEM_Init()=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
STPWM_Init()=Ok
STCLKRV_Init(CLKRV0)=Ok
)

OSD: top_address = C00D8508, top_address_tail = C010AF08dressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowled
Demodulator Reset FAILED!
)
OSD: palette init . . . passed
STCLKRV_Open(CLKR
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003acknowledge (0x00080003
)

uncompress font20 data ...ared symbols = 0 (0 comma
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addres
)
uncompress font24 data ..
uncompress font24 data ..
)
- fonts gzip -> ON
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
OSD: Initialized
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no a
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x000
)0

========================================
Samsung Brand 5512 Model**********
Dual CITI2C_Write STI2C_ERROR_
VIACCESSng acknowledge (0x000800
HW version 5.04
Loader version 5.01UD0)=Ok
STVTG
========================================I2C_Write Ok
STVID_In
OSD initializing......
QPSK STI2C_Wri
OSD Initialization complete no addressing acknowledge
3-010800
Loading...
CCCCCCCCCCCC
Checksum: OK(DD44)

3-02
9-02
Erased 35 sector
Erased 41 sector[0x7fe60000]LETEXT INIT<<<<<<<<<<<<<<<<<
Erased 42 sector[0x7fe70000]
Erased 43 sector[0x7fe80000]
STTTX_Init(T
Erased 44 sector[0x7fe90000] STI2C_Write Ok
Erased 45 sector[0x7fea0000]
QPSK STI2C_
Erased 46 sector[0x7feb0000]TVTG_Open(VTG0)=Ok
Erased 47 sector[0x7fec0000]
STVID_Op
Erased 48 sector[0x7fed0000]
QPSK STI2C_Write STI2C_ERR
Erased 49 sector[0x7fee0000]g acknowledge (0x00080003
Erased 50 sector[0x7fef0000]
Erased 51 sector[0x7ff00000]TDENC_Init : Done
Erased 52 sector[0x7ff10000]STI2C_ERROR_ADDRESS_ACK - no
Erased 53 sector[0x7ff20000]
Writing end2STDENC_Set

========================================
QPSK STI2C_Write Ok
Samsung Brand 5512 Model
QPSK STI2C_Write S
Dual CI no addressing acknowle
VIACCESS
HW version 5.04
)
Mode 576,50,270
Loader version 5.01ite STI2C_ERROR_ADDRESS_ACK - no
========================================
Select Download
TimeoutPSK STI
Reboote STI2
STLLI_Init(LLI)=Ok - no addressing a
STLLI_Open(LLI)=Ok003
STAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
)
QPSK STI2C_Write STI2C_
STEVT_Init()=OkK - no addressi
STPWM_Init()=Ok
STCLKRV_Init(CLK
QPSK STI2C_Read STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003)003

Demodulator Reset FAILED!2C_ERROR_ADDRESS_ACK - no
PTI_Init()=Okknowledge (0x
STCLKRV_Open(CLKRV0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003_ACK - no addressing acknowledge (0x00080003
)
declared symbols = 0 (0 commands + 0 mac)

)
allocated symbols = 0 / 0ROR_ADDRESS_ACK - no addr
free memory size = 800000 bytes
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003RESS_ACK - no addressing acknowledge (0x00080003
)
STAUD_Init(AUD0)=QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowRESS_ACK - no addressing acknowledge (0x00080003
ledge (0x00080003)
Ok
STVTG_Init(VTG0)=Ok_Write STI2C_ERROR_
STVID_Init(VID0)=Okressing acknowledge
QPSK STI2C_Write Ok
>>>>>>>>>>>>>>>>>>START TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<<TI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge
)

QPSK STI2C_Write Okte STI2C_ERROR_ADDR
STTTX_Init(TTX)=Oksing acknowledge (
QPSK STI2C_Write Ok
STAUD_Open(AUD0)=Ok
QPSK STI2C_Write Okce 'OSD0' initialis
STVTG_Open(VTG0)=Okk
QPSK STI2C_Write Ok
STVTG_GetMod
STVID_Open(VID0)=Ok,720,576 Scan 2, FR
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
5512STDENC_Init : Done
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledg
)(
STDENC_Open, Device 'DENC0' Opened
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080

STVTG_SetMode()=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR
)D
Mode 576,50,27000ressing acknowled
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
OSD: bot_address = C010B408, bot_address_tail = C013DE08
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003SS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 . passed
QPSK STI2C_Write STI2C_ERRO
)A
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
OSD: palette init . . . pas
)
)g
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
uncompress font16 data ...

)S
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)

)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003K - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Ok
)

========================================
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK Samsung Brand 5
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Okversion 5.04
Loa
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003=============
Select Download
)
OSD: Region creation . . . passedI_Init(LLI)=Ok

QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003reatePartition()=Ok
STEVT_Init()=Ok
S
)W
OSD Region: W=720, H=576, X=0, Y=0Init(CLKRV0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x000800030003
)

OSD: top_address = C00D8508, top_address_tail = C010AF08ing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressin
Demodulator Reset FAILED!
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x0008
)0
OSD: palette init . . . passed
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003+ 0 numbers)
)Q

uncompress font20 data ...ADDRESS_ACK - no addressin
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
allocated symbols = 0 / 0
f
)e
uncompress font24 data ..
)k
- fonts compact -> ON
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003T TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<<
)
- fonts gzip -> ONSK STI2C_Write STI2C_
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
>>>>>>>>>>>>>>>>>>EN
)T
OSD: Initialized<<<<<<<<<<<<<<<<
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
STTTX_Init(TTX)=Ok
QPSK STI2C_Write Ok
)
5512
)D
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressi
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
5512STDENC_SetEncodingMode : Done
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing ack
)
VIACCESS STI2C_ERROR_ADDRESS_ACK
HW version 5.040080003
Loader version 5.01
)
QPSK S
========================================ddressing acknowledge (0x00080003
Select Download
Timeout
Reboot
STLLI_Init(LLI)=OkPSK STI2C_Write ST
STLLI_Open(LLI)=OkCK - no addressing
STAVMEM_Init()=Ok080003
STAVMEM_CreatePartition()=Ok
STEVT_Ini
)

QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00
)0
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00
)0
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00
)0
QPSK STI2C_Read STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003)
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00

Demodulator Reset FAILED!
PTI_Init()=Ok
STCLKRV_Open(CLKRV0)=Okite STI2C_ERROR_ADDRESS
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)

)
QPSK STI2C_Write Okdge (0x00080003
STVID_Init(VID0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003e Ok
STVTG_GetMode(Active XYWH 132,2
)7
>>>>>>>>>>>>>>>>>>START TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<

QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no a
QPSK STI2C_Write Oke (0x00080003
STTTX_Init(TTX)=Ok
QPSK STI2C_Write Ok
)
STAUD_Open(AUD0)=Ok H=576, X=0, Y=0
QPSK STI2C_Write Ok
QPSK ST
STVTG_Open(VTG0)=OkR_ADDRESS_ACK - no
QPSK STI2C_Write Okge (0x00080003
STVID_Open(VID0)=Ok
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003_tail = C010AF08
QPSK ST
)C
5512STDENC_Init : DoneESS_ACK - no addressin
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
OSD: bot_address = C010B408, bot_address_tail = C013
)0
STDENC_Open, Device 'DENC0' Ope

)
OSD: palette init . . . passed
)
Mode 576,50,27000rite STI2C_ERROR_
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)

uncompress font20 data ..
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003K STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing
)
)
- fonts gzip -> ON
QPSK STI2C_Write
)T
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
OSD: Initialized
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003e (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003e (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Okowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR
)

==============
Device 'OSD0' initialisedQPSK STI2C_Write Ok
Samsung Brand
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Okl CI
VIACCESS
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 Loader version 5.01
===============
)=
OSD: Region creation . . . passed

===
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 Samsung Brand 5512 Model
Du
)
OSD Region: W=720, H=576, X=0, Y=0 VIACCESS
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003ader version 5.01

)

)
OSD: set draw region addresses . . . passed===================================
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003 Initialization complete
3-01
Loading...
)C
OSD: palette init . . . passedm: OK(DD44)

QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x0008000d 36 sector[0x7fe10000]

)
uncompress font16 data ...5 sector[0x7fea0000]
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
- fonts gzip -> ON
QPSK STI2C_Write STI2C_ERROR_003)
OSD: Initialized
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
QPSK STI2C_Write STI2C_ERROR_ADDRESS_ACK - no addressing acknowledge (0x00080003
)
 
Scusa ma qualche info in più??
Cosa stavi facendo? Stavi caricando un firmware con hyper terminal? Si accende è morto?
 
scusa hai ragione..allora..il deco non si accende piu..fa il rebbot(si vede la scritta9500),poi basta:buio:mad:..
la cosa strana che mi continua a caricare firme ma dopo stessa storia di prima(carica solo con hyper,con altri no)...un centro assistenza mi ha detto che partito il tuner,e se voglio mi lo mandano a roma dal distributtore ufficiale.
spesa €50 +ssp....pero non è detto che sia il tuner 100%:doubt:
quindi,ho provato a rianimarlo ma mi da quei errori sopra......
mi dispiace buttarlo via(ho un ct),ma il sammy rimane sempre sammy per me:D
a questo punto,ho deciso di chiedere aiuto agli amici del forum magari spuntera qlq soluzione,se no,pasienza:sad:..
ciao grazie...
 
Accertati bene che sia effettivamente da mandare in assistenza perchè come avrai letto quì sul forum a qualche utente gli e lo hanno rimandato con seriale bloccata.
 
DA quello che si legge sembra partito il tuner si, in pratica non comunica più correttamente sul bus I2C, bus di comunicazione di tutte le periferiche del sammy.
Puoi provare una strada e vedere che sia effettivamente il tuner.
Carica un firmware successivo alla 123, sia 123 o superiore insomma, fai fare tutte le operazioni ed attendi che riparta il decoder, se riparte, poi a prescindere dal risultato rimetti una 118 pulita, niente emu o altro, andrebbe bene anche una originale ma inferiore alla 123 e vedi cosa succede.
Perderai tutti i settings ma l'intento è proprio quello. Buona fortuna...
 
Ad aggiunta, di solito se il tuner parte inizia a dare difetti di ricezione, funzionamento decente a freddo per poi iniziare a dare problemi quando caldo e cmq non di botto.

Il tizio del decoder sostituito almeno avesse avuto indietro il decoder funzionante.... manco quello poveraccio.
 
grazie ragazzi per le risposte..
@katagy,adesso faccio come dici tu poi posto i risultati..speriamo bene...
ah,per il tuner ,il deco non mi ha mai dato problemi:eusa_think: prima..si è spento di colpo:mad:mah....
saluti...
 
Facci sapere, se non và a buon fine ti mando qualcosa per il tuner, ma ci devi saper mettere le mani...
 
ho seguito il consiglio di katagy,ma nulla da fare,stesso risultato:mad:
ok ANG,mandami pure anche se non sono pratico:eusa_wall:ma con l'aiuto di un amico proviamo a fare qlqcosa(tanto +danni di questi non possiamo fare:D)
la speranza è l'ultima a morire...
grazie mille....
 
Devi accedere o registrarti per poter rispondere.
Indietro
Alto Basso